HOOD KILNS
HOOD KILNS
for fusing, slumping, sagging, bending
Our offer includes a wide range of kilns, from small studio kilns to huge industrial aggregates with high automation level. The wide choice of optional features will satisfy the highest technical requirements, coming with new technologies.
Model |
Inner sizes (mm) w. l. h. |
Outer sizes (mm) w. l. h. |
Power kW |
Voltage V |
---|---|---|---|---|
PS 05.05.02-8 |
500 500 200 |
700 750 650 |
3,2 |
1x230 |
PS 08.05.02-8 |
800 500 200 |
1000 750 650 |
7,5 |
3x400 |
PS 1-250 |
1000 600 250 |
1300 900 1150 |
9 |
3x400 |
PS 1-400 |
1000 600 400 |
1300 900 1300 |
9 |
3x400 |
PS 1.1-250 |
1200 600 250 |
1500 900 1150 |
10,2 |
3x400 |
PS 1.1-400 |
1200 600 400 |
1500 900 1300 |
10,2 |
3x400 |
PS 1.2-250 |
1000 800 250 |
1300 1100 1150 |
10,2 |
3x400 |
PS 1.2-400 |
1000 800 400 |
1300 1100 1300 |
10,2 |
3x400 |
PS 2-250 |
1200 1000 250 |
1700 1500 1300 |
16 |
3x400 |
PS 2-400 |
1200 1000 400 |
1700 1500 1450 |
16 |
3x400 |
PS 3-250 |
1600 800 250 |
2100 1300 1300 |
16 |
3x400 |
PS 3-400 |
1600 800 400 |
2100 1300 1450 |
16 |
3x400 |
PS 3.1-250 |
1500 1000 250 |
2000 1500 1300 |
18 |
3x400 |
PS 3.1-400 |
1500 1000 400 |
2000 1500 1450 |
18 |
3x400 |
PS 3.2-250 |
1600 1000 250 |
2100 1500 1300 |
18 |
3x400 |
PS 3.2-400 |
1600 1000 400 |
2100 1500 1450 |
18 |
3x400 |
PS 3.3-250 |
1800 900 250 |
2300 1400 1300 |
18 |
3x400 |
PS 3.3-400 |
1800 900 400 |
2300 1400 1450 |
18 |
3x400 |
PS 4-250 |
1600 1200 250 |
2100 1700 1300 |
19 |
3x400 |
PS 4-400 |
1600 1200 400 |
2100 1700 1450 |
19 |
3x400 |
PS 4.1-250 |
1600 1500 250 |
2100 2000 1300 |
19 |
3x400 |
PS 4.1-400 |
1600 1500 400 |
2100 2000 1450 |
23 |
3x400 |
PS 4.2-250 |
1800 1200 250 |
2300 1700 1300 |
23 |
3x400 |
PS 4.2-400 |
1800 1200 400 |
2300 1700 1450 |
25 |
3x400 |
PS 5-250 |
2000 1000 250 |
2500 1500 1300 |
23 |
3x400 |
PS 5-400 |
2000 1000 400 |
2500 1500 1450 |
25 |
3x400 |
PS 5.1-250 |
2100 1100 250 |
2600 1600 1300 |
25 |
3x400 |
PS 5.1-400 |
2100 1100 400 |
2600 1600 1450 |
28 |
3x400 |
PS 6-250 |
2000 1200 250 |
2500 1700 1300 |
28 |
3x400 |
PS 6-400 |
2000 1200 400 |
2500 1700 1450 |
29 |
3x400 |
PS 6.1-250 |
2100 1200 250 |
2600 1700 1300 |
31 |
3x400 |
PS 6.1-400 |
2100 1200 400 |
2600 1700 1450 |
32 |
3x400 |
PS 6.2-250 |
2200 1100 250 |
2700 1600 1300 |
31 |
3x400 |
PS 6.2-400 |
2200 1100 400 |
2700 1600 1450 |
32 |
3x400 |
PS 6.4-250 |
2200 1200 250 |
2700 1700 1300 |
31 |
3x400 |
PS 6.4-400 |
2200 1200 400 |
2700 1700 1450 |
32 |
3x400 |
PS 6.5-250 |
2200 1500 250 |
2700 2000 1300 |
34 |
3x400 |
PS 6.5-400 |
2200 1500 400 |
2700 2000 1450 |
36 |
3x400 |
PS 6.6-250 |
2300 1300 250 |
2800 1800 1300 |
34 |
3x400 |
PS 6.6-400 |
2300 1300 400 |
2800 1800 1450 |
34 |
3x400 |
PS 7-250 |
2500 1500 250 |
3000 2000 1300 |
36 |
3x400 |
PS 7-400 |
2500 1500 400 |
3000 2000 1450 |
36 |
3x400 |
PS 7.1-250 |
2800 1500 250 |
3300 2000 1300 |
36 |
3x400 |
PS 7.1-400 |
2800 1500 400 |
3300 2000 1450 |
39 |
3x400 |
PS 7.2-250 |
3000 1500 250 |
3500 2000 1300 |
39 |
3x400 |
PS 7.2-400 |
3000 1500 400 |
3500 2000 1450 |
44 |
3x400 |
PS 7.3-250 |
3200 2000 250 |
3700 2500 1300 |
55 |
3x400 |
PS 7.3-400 |
3200 2000 400 |
3700 2500 1450 |
58 |
3x400 |
PS 8-250 |
3500 1800 250 |
4000 2300 1300 |
65 |
3x400 |
PS 8-400 |
3500 1800 400 |
4000 2300 1450 |
68 |
3x400 |
PS 8.1-250 |
4000 2000 250 |
4500 2500 1300 |
68 |
3x400 |
PS 8.1-400 |
4000 2000 400 |
4500 2500 1450 |
71 |
3x400 |
PS 8.2-250 |
4000 1800 250 |
4500 2300 1300 |
75 |
3x400 |
PS 8.2-400 |
4000 1800 400 |
4500 2300 1450 |
79 |
3x400 |
PS 8.3-250 |
5000 1800 250 |
5500 2300 1300 |
85 |
3x400 |
PS 8.3-400 |
5000 1800 400 |
5500 2300 1450 |
89 |
3x400 |
PS 8.4-250 |
5500 1800 250 |
6000 2300 1300 |
93 |
3x400 |
PS 8.4-400 |
5500 1800 400 |
6000 2300 1450 |
96 |
3x400 |
• PS – hood installed on the table (swivel hinges)
• PSV – hood installed on the supporting frame, pull-out table, rails
• PSR – ”top lift system” hood suspended on the mobile frame, fixed table
• 1. digit specifies the inner dimensions of the kiln
• other digits (behind the dash) define interior hood height in mm
• models 05, 08, 1 and 2 in PS design
• models 3 and 4 in PS and PSV designs
• models 4, 5, 6, 7, 8 in PS, PSV and PSR designs
• standard interior heights 250 and 400 mm, optionally other interior heights ”made-to-measure”
• construction of the hood and peripheral table parts made of stainless steel
• electric control box on the kiln side – right or left as per your choice
• surface finishing of the steel frame: fired powder coating, shade as per your choice
• brick lining of high thermal resistance, anti-dust finish
• models PS with adjustable feet
• models PS with castors (instead of adjustable feet)
• observation holes in the sidewalls with manual flaps and two-position locking device
• automatically controlled side flaps from controller, with electric motors, possibility to open them manually
when looking inside the kiln
• air vents in the top with manual flaps and multi-position locking device (excluding models PS 05, 08 and 1)
• automatically controlled top flaps, with electric motors
• manual kiln opening – pneumatic struts
• automatic kiln opening, with electric motor
• operational surface exceeding the level of the table steel construction
• collecting strips to level glass separator on the table
• recessed table – 70 mm deep
• adaptation of the table for deep slumping
• electrical heating spirals
• infra-red emitters
• additional peripheral heating spiral in the hood, ON/OFF button
• additional peripheral heating spiral in the recessed table, ON/OFF button
• additional heating spirals for deep slumping, ON/OFF button
• additional heating spirals for deep slumping, controlled automatically
• independent control of both main and additional heating, possibility to preset different temperatures
• batch cooling by manual kiln opening
• electromechanical kiln opening with push-button
• automatic electromechanical kiln opening programmed on the controller
• glass annealing by natural temperature drop
• controlled annealing as per programmed curve
• final cooling by natural temperature drop, using air vents
• forced ventilation, ON/OFF button
• forced ventilation controlled automatically
• controller installed as per kiln model, equipment and technological requirements
• PID controllers for easy applications
• sets of PID controllers in MASTER / SLAVE concept
• programmable logic controllers including software
• dimensions ”made-to-measure”
• additional table
• additional rings increasing the interior height
• additional peripheral heating spirals in the ring
• reliable technology of heating and annealing
• guaranteed temperature distribution in the kiln
• reliable repeatability of the process
CONTINUOUS KILNS
for fusing, slumping, sagging
Model |
Inner sizes (mm) w. l. h. |
Outer sizes (mm) w. l. h. |
Power kW |
---|---|---|---|
TSO 04.18.02-10 |
400 18000 200 |
1100 22000 1700 |
66 |
TSO 05.18.02-10 |
500 18000 200 |
1200 22000 1700 |
82 |
TSO 06.18.02-10 |
600 18000 200 |
1300 22000 1700 |
96 |
TSO 08.22.02-10 |
800 22000 200 |
1500 26000 1700 |
152 |
TSO 1,2.26.02-10 |
1200 26000 200 |
1900 30000 1700 |
196 |
TSO 1,2.30.02-10 |
1200 30000 200 |
1900 34000 1700 |
224 |
TSO 1.2.34.02-10 |
1200 34000 200 |
1900 38000 1700 |
254 |
• conveyor belt of refractory material
• electrical or gas heating
• electric control box on the kiln side – right or left as per your choice
• surface finishing of the steel frame: fired powder coating, shade as per your choice
• outer mantle of stainless steel sheets
• observation holes in the sidewalls with manual flaps and two-position locking device
• PID controller or programmable logic controllers including software
• continuous change of conveying speed
• dimensions ”made-to-measure”
• extremely low energy consumption
• short start-up time
• both one-shift and continuous operation possible
• reliable technology of heating and annealing
• guaranteed temperature distribution in the kiln
• reliable repeatability of the process
• noiseless operation
• high output